Technology is evolving rapidly in the beauty and cosmetic treatments industries. Few devices represent the leaps and bounds we’ve experienced better than the Picosecond Laser.
Skin imperfections, acne scarring, discoloration, premature aging, unwanted tattoos, and other conditions can shake our self-confidence. After all, we all long for clear, bright, youthful skin – whatever our age. If you relate to these sentiments, Picosecond laser technology may be the miracle solution you’ve been looking for.
It’s fast, safe, and non-invasive. Its results are backed by hard, scientific evidence too, and that’s not to mention the countless treatment success stories and see-it-to-believe-it before and afters.
In this article, we’ll lift the veil on Pico laser technology, what it is, how it works, and how it can revolutionize the way you care for your skin.
What is Pico Laser Technology?
Pico laser technology is a non-surgical, non-invasive laser skin treatment that can be used to address the majority of common skin imperfections, including spots caused by sun damage and acne scarring.
Pico technology is regarded as one of the most advanced laser treatments currently available on the market. It delivers noticeable, permanent results in fewer sessions than comparable options and is safe, requires minimal downtime, and can be used across the entire face and body.
How does Pico Laser Work?
The laser emitted by the system has a strong penetration ability which allows it to reach the deep layer of the dermis. The pigment particles absorb the light energy and explode sharply, and burst into tiny pieces, thus diminishing the color density and getting rid of it. So the appliance can effectively do away with mutant pigmentations and vascular tissue based on undamaged ambient tissue. This is called the ‘Selective heat absorption’ principle in the medical field.
What does the Pico Laser Cost?
What Can The Pico Laser Treat?
Laser tattoo removal is nothing new but never before has it been so effective. For years, Q-Switched lasers were the gold standard in tattoo removal. The PicoSure laser has taken it to the next level. With picosecond technology, a high amount of energy can be released in an extremely short timeframe. This energy shatters the tattoo ink into much smaller particles and effectively addresses a wider range of tattoo inks. The shorter time frame reduces the potential for thermal damage to the skin.
The scars left behind by acne can be extremely challenging to reduce or eliminate. These raised, discolored marks are resistant to most skin resurfacing treatments, preventing any significant results. The PicoSure laser works in two ways to treat acne scars. First, the laser penetrates the skin to create localized areas of thermal damage. Second, the thermal damage combines with the picosecond technology to break up the scar. After a series of treatments, most patients see a significant reduction in the appearance of their scars, with improved skin texture and a clearer complexion.
Even if you’ve never gotten a tattoo or had any more than a pimple or two, you may still be able to take advantage of the benefits PicoSure has to offer. The PicoSure laser provides effective skin resurfacing, reducing fine lines and wrinkles. These treatments stimulate collagen growth in the deeper layers of the dermis, creating plumper, rejuvenated look. The increase in collagen growth results in fresh, rejuvenated skin and a more youthful appearance. PicoSure can also diminish the dark spots. It delivers laser energy to the skin and targets the pigment. As the energy is absorbed into the skin, its gentle vibration shatters the pigment, breaking it into micro-particles.
What is the difference between Pico and Q-Switched Laser?
The difference is in pulse duration which is the time a laser shot stays on the skin.
Q-Switched Laser fires at nanoseconds, while Pico Laser fires at picoseconds which
is x100 shorter!
- More laser shots can be fired at the same time
- Break down pigments into much smaller fragments
- The body clears stubborn pigmentation at a faster rate
- Fewer treatment sessions are required to see results
Why is the picosecond laser cost so different compared to Q-switch laser? And how was it made?
Have a check of a real pico laser generator. Although you may not so clear about its complex light guiding structure. But notice this small part, it’s the pico source use the same as Picosure, since the laser output the pulse width already sure, needn’t switch lasers adjust part. Only this part will cost about a huge of dollars for a real 500ps pulse width resource. So besides the pulse width test proven, the price also has another role to let you know whether you are talking with a real pico or not.
How to buy a pico laser machine?
Pico laser is a pigment laser that operates in ultrashort pico laser pulses. Instead of nanosecond pulses in regular Q-switched lasers, the pico laser’s picosecond pulses enable it to carry less photo-thermal effect and a higher photoacoustic effect.
So, with a shorter pulse width, pico lasers are able to have better treatment. 500PS short pulse width is the best suitable pulse width for the picosure laser machine.
Perfect after-sales service system
In the market, few companies can independently develop and produce picosure laser machines. If the machine is damaged, they can not provide technical support and after-sales service in time.
Oriental-Laser Picolas has focused on the development and production of picosure laser equipment for more than ten years, with a cutting-edge studio and a professional production workshop. We can provide 24*7h after-sales service and technical guide. Let you contact us any time, anywhere.
Pico laser before and after
The results of this treatment will appear gradually as your skin’s natural regenerative abilities. For most patients, results are first visible about 2 or 3 weeks after the first appointment. Your results will continue to improve until your last treatment, or until optimal results have been achieved.